Select/Modify Keys; Select; Modify - HP 3324A Operating And Programming Manual

SELECT/MODIFY
Keys .

Select

Modify

The SELECT/MODIFY keys are used in conjunction
with most of the other keys and the display. The four
arrow keys are referred
keys in this manual.
The select mode is used to move through the menus
to a certain item/point, which can then be activated
with the (Select) key. For example, to choose the
squarewave output, press the (Wa) key to display
the current waveform and the options available. Move
the cursor with the arrows to the squarewave symbol,
and press ISelect). A squarewave output signal will then
be activated if all the parameters are valid for this
waveform.
The modify mode is entered by pressing the yellow
key. The yellow key is referred to as the (Modify) key
in this manual. The arrow keys are used to modify
the displayed value. "M" is shown in the display, to
indicate that you are in the modify mode. The cursor is
automatically placed on the most significant digit (to the
far left).
Use the @ and a keys to select the digit for
modification as indicated by the cursor. Pressing the
or (,,1 causes the cursor to spring to the extremes.
To delete a digit, again place the cursor to the right of
the digit you wish to delete and press [BackSpace).
to
as the a, a, a and a
Instrument Operation 3-11