HP 3324A Operating And Programming Manual page 250

AM; Amplitude
E-4 HP 3324A Command Syntax
The AM command sets the amplitude of the main signal.
Sending IAM causes the instrument to output its current
amplitude.
Instrument Preset Value:
Both commands are available on the HP 3325A.
Syntax
Table E-2. AM 'cvalue" Range Given "units"
"value" Range
0.001 to 10.0
0.004 to 40.0
1.0 to 10000.0
4.0 to 40000.0
0.000354 to 3.53
0.00142 to 14.1
0.354 to 3530.0
1.42 to 14100.0
-56.02 to 23.98
illegal
Table E-3. IAM Response Format
Query Command Current Units
1.0 mV(p-p)
Description High Voltage
vo
M V
VR Vrms
MR
DB
Off
On
Off
On
Off
On
Off
On
Off