Table of Contents
Advertisement
About this Manual
Brief Operating
Hints
This manual is basically divided into two main parts:
A part which describes the local control of the
n
instrument (chapters 2 to 8).
A part which describes the remote control of the
n
instrument (chapters 9 to 11).
The examples in the local control part are shown in such
a way that on the left side of the page the keystrokes
are shown, while the right side gives an explanation of
what
happens. All hardkeys are shown in a box as they
are on the instrument, for example, the FREQ key is
represented by IFres)
are the blue SIIIE'T
and "MODIFY" are not printed on the keys,
but to simplify things they are shown as IShift] and
(Modify) in this manual. The arrow keys are represented
To obtain the menu that you require, press the relevant
as a line, is shown by blinking of the display. For
example, if the cursor is on "FREQ" in the Parameter
menu, then "FREQ" will blink. When data is being
entered, the position of the cursor is shown by a line.
To move around the menu use the m, Ij, a and @J
keys to move the cursor one position. To move to the
extremes use the (iiJ a,: and: keys.
in this manual. The only exceptions
key and the yellow MODIFY key.
Instrument introduction 1-3
Advertisement
Table of Contents
