Table of Contents
Advertisement
Storage and
Shipment
Return Shipments
to HP
C-10 Installation
The instrument can be stored or shipped at
temperatures between -40°C and +75'C.
instrument should be protected from temperature
extremes which may cause condensation within it.
If the instrument is to be shipped to a Hewlett-Packard
Sales/Service Office, attach a tag showing owner, return
address, model number and full serial number and the
type of service required.
The original shipping carton and packing material
may be re-usable, but the Hewlett-Packard
Sales/Service Office will also provide information and
recommendations on materials to be used if the original
packing is no longer available or reusable. General
instructions for repacking are as follows:
1. Wrap instrument in heavy paper or plastic.
2. Use strong shipping container. A double wall carton
made of 350-pound test material is adequate.
3. Use enough shock-absorbing material (3 to 4 inch
layer) around all sides of the instrument to provide a
firm cushion and prevent movement inside container.
Protect control panel with cardboard.
4. Seal shipping container securely.
5. Mark shipping container FRAGILE to encourage
careful handling.
6. In any correspondence, refer to instrument by model
number and serial number.
The
Advertisement
Table of Contents
