Table of Contents
Advertisement
Note
Instrument Cooling
Claims and
Repackaging
At output amplitudes of <50 mV in extreme
environmental conditions, it is recommended to use a
double shielded BNC cable. For example, use HP p/n
5180-2459 (1.22 m, RG58V Triax, 500).
The HP 3324A is equipped with a cooling fan mounted
inside the rear panel. The instrument should be
mounted so that air can freely circulate through it.
When operating the HP 3324A, choose a location that
provides at least 75 mm (3 inches) of clearance at the
rear, and at least 25 mm (1 inch) of clearance at each
side. Failure to provide adequate air clearance will result
in excessive internal temperature, reducing instrument
reliability.
If physical damage is evident or if the instrument
does not meet specification when received, notify the
carrier and the nearest Hewlett-Packard Service Office.
The Sales/Service Office will arrange for repair or
replacement of the unit without waiting for settlement of
the claim against the carrier.
Installation C-9
Advertisement
Table of Contents
