Storage and
Shipment
Return
Shipment
to HP
The instrument can be stored or shipped at temperatures between
-40°C and +75"C. The instrument should be protected from
temperature extremes which may cause condensation within it.
If the instrument is to be shipped to a Hewlett-Packard Sales/Service
Office, attach a tag showing owner, return address, model number
and full serial number and the type of service required.
The original shipping carton and packing material may be re-usable,
but the Hewlett-Packard Sales/Service Office will also provide
information and recommendations on materials to be used if
the original packing is no longer available or reusable. General
instructions for repacking are as follows:
1. Wrap instrument in heavy paper or plastic.
2. Use strong shipping container. A double wall carton made of
350-pound test material is adequate.
3. Use enough shock-absorbing material (3 to 4 inch layer) around
movement inside container. Protect control panel with cardboard.
4. Seal shipping container securely.
5. Mark shipping container FRAGILE to encourage careful handling.
6. In any correspondence, refer to instrument by model number and
serial number.
Installation 3-7