Table of Contents
Advertisement
4 Preparation and operation
Result
4.3.6 Changing the battery (ACCUVAC Lite)
Requirement
40
EN
ACCUVAC Pro/ACCUVAC Lite
5. Push the battery connector into the socket in the battery
compartment until it clicks into place.
When doing so, note: All pins must be connected with the
plug.
6. Install the battery compartment cover
battery compartment cover",
7. Install the suction hose reel
hose reel",
page 45).
8. To check whether the battery is correctly inserted: Switch on
the device
(see „4.6 Switching on the device",
9. Switch off the device
page 62).
10. Charge battery
11. Perform a function check
check",
page 89).
The battery is changed.
Preparations for the battery replacement are complete
(see „4.3.4 Preparing for a battery replacement",
1. Detach the red and black cables from the contacts on the
battery.
2. Stand the device up.
page 44).
(see „4.4.3 Installing the suction
(see „4.7 Switching off the device",
(see „4.3.2 Charging the battery",
(see „6.2 Performing a function
(see „4.4.2 Installing the
page 61).
page 34).
page 37).
Advertisement
Table of Contents
