Weinmann ACCUVAC Pro Instructions For Use Manual page 80

5 Hygienic reprocessing
Part Cleaning
Wipe with a damp
cloth:
Wall mounting
Use water or mild
soap
Wipe with a damp
12 V connection cloth:
cable Use water or mild
soap
Power supply unit
Wipe with a damp
and charger
cloth:
Protective bag
Use water or mild
Accessories bag
soap
Shoulder strap
Stages of machine cleaning and disinfection in a washer-disinfector according to ISO 15883-1:
• Rinse for 1 minute with cold, demineralized water
• Clean for 5 minutes at 55 °C (± 2 °C) with neodisher
• Neutralize for 1 minute with demineralized water (1/3 cold water, 2/3 warm water)
• Rinse for 1 minute with demineralized water (1/3 cold water, 2/3 warm water)
• Thermally disinfect for 5 minutes at 93 °C with demineralized water
80 EN ACCUVAC Pro/ACCUVAC Lite
Disinfection
Wipe disinfection
(Recommendation:
®
terralin
Wipe disinfection
(Recommendation:
®
terralin
Wipe disinfection
(Recommendation:
®
terralin
It is important to observe the instructions for use from the
manufacturers of the individual accessories or other parts. They
should always be followed.
Some disinfectants can discolor the secretions canister cover of
the reusable canister system and the hoses/tubes. This has no
effect on the function of the device.
14. If necessary: Install the device base
device base", page 42).
15. If necessary: Install the battery compartment cover
(see „4.4.2 Installing the battery compartment cover",
page 44).
16. Install the holder for canister system
holder for canister system",
17. Install the suction hose reel
hose reel", page 45).
Thermal
disinfection*
Not permitted
protect)
Not permitted
protect)
Not permitted
protect)
®
MediClean (0.5 % v/v)
(see „4.4.1 Installing the
page 45).
(see „4.4.3 Installing the suction
Sterilization
Not permitted
Not permitted
Not permitted
(see „4.4.4 Installing the