Table of Contents
Advertisement
4 Preparation and operation
70
EN
ACCUVAC Pro/ACCUVAC Lite
6. Insert the Serres suction bag in the Serres secretions canister.
When doing so, note:
•
Only use intact Serres suction bags to protect the device
from contamination.
•
The film of the Serres suction bag must be completely
inside the Serres secretions canister and the lid of the Serres
suction bag must close off the Serres secretions canister
tightly.
7. Switch on the device
page 61).
8. Select a vacuum of -0.8 bar and press on the center of the
Serres suction bag from above.
The suction bag must unfurl.
9. Close the elbow connector on the Serres suction bag with your
finger.
The Serres suction bag must unfurl completely until it rests on
the base and against the sides of the Serres secretions canister.
10. Connect the disposable suction hose to the elbow connector
on the Serres suction bag.
11. Continue suction
(see „4.6 Switching on the device",
(see „4.8 Performing suction",
page 62).
Advertisement
Table of Contents
