Table of Contents
Advertisement
7 Faults
7
Faults
7.1 Device
Fault
Device cannot be switched on
94
EN
ACCUVAC Pro/ACCUVAC Lite
If you are unable to eliminate faults immediately with the aid of the
table, you should contact
ATMOS MedizinTechnik GmbH & Co. KG or your authorized
dealer to have the device repaired. To avoid serious damage, do
not continue using the device.
Risk of infection from suction material on device, accessories
and other parts!
Suction material can contaminate the device, accessories and
other parts and infect the patient and user.
Always wear suitable gloves.
Reprocess all the parts after use hygienically in accordance with
the table in the instructions for use.
If suction material enters the device: Reprocess the device
hygienically and have it repaired.
The following faults apply for both devices. Faults or causes of
faults which only apply for one device are marked with
"(ACCUVAC Pro only)" or "(ACCUVAC Lite only)".
Cause
Battery not connected
Battery empty
Device not connected to the power
supply
Fuse defective (ACCUVAC Lite
only)
Device defective
Remedy
Check the battery connection.
•
Charge battery.
•
Replace battery.
Check the power supply
connections.
Have the device repaired.
Have the device repaired.
Advertisement
Table of Contents
