Switching On The Device - Weinmann ACCUVAC Pro Instructions For Use Manual

4.6 Switching on the device

Material damage if the battery is not completely charged the
first time the device is used!
Failure to charge the battery completely before the device is used
for the first time can damage the battery.
 Only operate the device with a battery showing at least 2 green
Requirement
•
•
1. Switch on the device using the On/Off button
Result The device is ready for use.
status LEDs.
A battery showing at least 2 green status LEDs is in the device
or
The device is connected to the power supply accessories.
ACCUVAC Pro
• All the LEDs on the control panel light up briefly.
• The battery status indicator displays the battery status.
• The device starts with the last set vacuum. The
corresponding LED of the vacuum display flashes.
• The background illumination and the LEDs of the On/Off
button light up.
ACCUVAC Lite
• The battery status indicator displays the battery status.
• The operation indicator lights up.
ACCUVAC Pro/ACCUVAC Lite
4 Preparation and operation
:
EN 61