Table of Contents
Advertisement
3. Press against the lower end of the battery.
The battery must tilt forwards.
4. Tilt the battery out of the battery compartment and remove it.
5. Insert a new battery in the lower guide of the battery
compartment.
The battery must be tilted in the battery compartment.
6. Lay the device down on the lower part of the housing.
The opened battery compartment faces upward.
7. Press the battery into the lower guide of the battery
compartment until it sits horizontally in the battery
compartment.
8. Connect the red cable to the plus contact on the left of the
battery.
9. Connect the black cable to the minus contact on the right of
the battery.
10. Install the battery compartment cover
battery compartment cover",
4 Preparation and operation
page 44).
ACCUVAC Pro/ACCUVAC Lite
(see „4.4.2 Installing the
EN
41
Advertisement
Table of Contents
