Status - Proxim Harmony 8550 Manual

Click the <Status> button to view the 802.11b Access Point Status screen. The Status
screen reports the following information:
G Software version: This field reports the Flash Code version installed on the
Access Point. Periodically, Proxim makes new Flash Code available for
Harmony Access Points on Proxim's Web site. You can update an Access
Point's Flash Code using the Harmony System's Web browser interface or an
Access Point upgrade tool (which will be posted on Proxim's Web site with
new Flash Code versions). If you are experiencing a problem with your
Harmony equipment, a Proxim Technical Support representative may ask you
to report the device's Flash Code version.
G Physical Address: A Harmony 802.11b Access Point's physical address is
assigned at the factory and cannot be changed by the end user. The physical
address or MAC address is a 48-bit unique identifier assigned to each network-
ing device. The physical address is commonly written as six pairs of two
hexadecimal digits separated by colons (for example, 00:60:b3:6e:00:77).
The 802.11b Access Point Status screen is shown in the following example.

6. Status

45