Table of Contents
Advertisement
1
Getting Started
Introduction
The Agilent U2722A/U2723A USB Modular Source Measure Units (SMU)
can operate as a standalone or modular unit when used in a chassis. The
U2722A/U2723A has three outputs.
The voltage range is –20 V to 20 V, whereas the maximum current output
per channel is 120 mA. The U2722A/U2723A is controlled remotely over a
USB interface via the Agilent Measurement Manager software. The
U2722A/U2723A can also be programmed using the provided drivers or
via SCPI commands.
The U2722A/U2723A has the following features.
• voltage source or current source operation
• measurement capability for low current down to nA levels
• high resolution current setting for the low current range at 100 pA
The U2722A/U2723A has the following capabilities.
• voltage and current programming/readback
• programming syntax error detection
• user calibration and self-test capability
U2723A USB Modular Source Measure Unit
The U2723A USB Modular Source Measure Unit has the following features
and capabilities in additional to the U2722A USB Modular Source Measure
Unit:
• embedded test script (able to support three channels with coherent
• IV Curve application support in the Agilent Measurement Manager
• Increased (faster) rise/fall time
2
source and measurement capabilities)
software
U2722A/U2723A User's Guide
Advertisement
Table of Contents
