EAS32887
PART REPLACEMENT AND KEY CODE REGISTRATION REQUIREMENTS
In the course of use, you may encounter the following cases where replacement of parts and registra-
tion of code re-registering/standard keys are required.
TIP
Each standard key is registered during production, therefore re-registering at purchase is not neces-
sary.
Standard key is lost
All keys have been
lost (including code
re-registering key)
ECU is defective
Immobilizer unit is de-
fective
Main switch is defec-
tive
Accessory lock* is de-
fective
* Accessory locks mean the seat lock and fuel tank cap.
Code re-registering key registration:
When the immobilizer unit or ECU is replaced, the code re-registering key must be registered to the
unit.
To register a code re-registering key:
1. Turn the main switch to "ON" with the code re-registering key.
TIP
Check that the immobilizer system indicator light comes on for one second, then goes off. When the im-
mobilizer system indicator light goes off, the code re-registering key has been registered.
2. Check that the engine can be started.
3. Register the standard key, following the instructions in the section below.
Parts to be replaced
Main switch/
immobilizer unit
Main
Immobiliz-
switch
er unit
√
√
√
IMMOBILIZER SYSTEM
Accesso-
Standard
ECU
key
√
√
√
√
√
√
9-19
Key registration
requirement
ry lock*
and key
New standard key
Code re-registering
√
key and standard
keys
Code re-registering
key and standard
keys
Code re-registering
key and standard
keys
Code re-registering
√
key and standard
keys
√
Not required