Checking The Rear Shock Absorber Assembly; Adjusting The Rear Shock Absorber Assembly - Yamaha XSR 900 2022 Service Manual

a. Turn the adjusting screw "1" in direction "a"
or "b".
Direction "a"
Compression damping is increased
(suspension is harder).
Direction "b"
Compression damping is decreased
(suspension is softer).
Compression damping
Adjustment value from the start
position (Soft)
11
Adjustment value from the start
position (STD)
6
Adjustment value from the start
position (Hard)
1
* Start position: With the adjusting screw
fully turned in direction "a"
TIP
• Although the total number of clicks of a damp-
ing force adjusting mechanism may not exactly
match the above specifications due to small
differences in production, the actual number of
clicks always represents the entire adjusting
range. To obtain a precise adjustment, it would
be advisable to check the number of clicks of
each damping force adjusting mechanism and
to modify the specifications as necessary.
• When turning the damping force adjusting bolt
in direction "a", the 0 click position and the 1
click position may be the same.
a
EAS30808
CHECKING THE REAR SHOCK ABSORBER
ASSEMBLY
Refer to "CHECKING THE REAR SHOCK AB-
SORBER ASSEMBLY" on page 4-82.
1
b
PERIODIC MAINTENANCE
EAS30655
ADJUSTING THE REAR SHOCK ABSORBER
ASSEMBLY
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
Spring preload
ECA13590
NOTICE
Never go beyond the maximum or minimum
adjustment positions.
1. Remove:
• Side cover
Refer to "GENERAL CHASSIS (1)" on
page 4-1.
2. Adjust:
• Spring preload
a. Adjust the spring preload with the special
wrench "1" and extension bar "2" included
in the owner's tool kit.
b. Turn the adjusting ring "3" in direction "a" or
"b".
c. Align the desired position on the adjusting
ring with the stopper "4".
Direction "a"
Spring preload is increased (suspen-
sion is harder).
Direction "b"
Spring preload is decreased (suspen-
sion is softer).
Spring preload
Adjustment value (Soft)
1
Adjustment value (STD)
5
Adjustment value (Hard)
7
3-23
2 1
7 6 5 4 3
3
4
2
a
1
b