43, 45_Abs; Troubleshooting - Yamaha XSR 900 2022 Service Manual

Hide thumbs Also See for XSR 900 2022:

Table of Contents

43, 45_ABS

Front wheel sensor (missing pulses)

After the DTC 45 is recorded, DTC 43 will be recorded if a certain speed and time are exceeded.

1. Foreign material adhered around the front wheel sensor

• Check the surface of the sensor rotor and wheel sensor for foreign material, such as metal particles.

Is check result OK?

→ Go to step 2.

→ Clean the sensor rotor and wheel sensor.

2. Incorrect installation of the front wheel

• Check the components for looseness, distortion, and bends.

Refer to "CHECKING THE FRONT WHEEL" on page 4-14.

Is check result OK?

→ Go to step 3.

→ Replace the wheel axle, tire, front wheel, wheel bearings or oil seals.

3. Defective sensor rotor or incorrect installation of the rotor

• Check the surface of the sensor rotor for damage.

Refer to "MAINTENANCE OF THE FRONT WHEEL SENSOR AND SENSOR ROTOR" on page 4-

Is check result OK?

→ Go to step 4.

→ Replace the sensor rotor.

4. Defective front wheel sensor or incorrect installation of the sensor

• Check the wheel sensor for damage and the installed condition of the sensor.

Refer to "MAINTENANCE OF THE FRONT WHEEL SENSOR AND SENSOR ROTOR" on page 4-

Is check result OK?

→ Replace the hydraulic unit assembly (ABS ECU).

Refer to "ABS (ANTI-LOCK BRAKE SYSTEM)" on page 4-52.

→ Repair or replace the wheel sensor.

Table of Contents