Yamaha XSR 900 2022 Service Manual page 573

A
1
O/G R/W
Is resistance ∞ Ω?
YES
→ Go to step 4.
NO
a. Replace the wire harness.
b. Start the engine and let it idle for approximately 5 seconds.
c. Check the DTC using the malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→ Go to step 7, and complete the service.
NO
→ Go to step 4.
4. Installed condition of cylinder-#3 ignition coil.
• Check for looseness or pinching.
Refer to "CAMSHAFTS" on page 5-16.
Is check result OK?
YES
→ Go to step 5.
NO
a. Reinstall or replace the ignition coil.
b. Start the engine and let it idle for approximately 5 seconds.
c. Check the DTC using the malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→ Go to step 7, and complete the service.
NO
→ Go to step 5.
5. Defective cylinder-#3 ignition coil.
• Measure the primary coil resistance of the cylinder-#3 ignition coil.
Refer to "CHECKING THE IGNITION COILS" on page 8-44.
B
1
2
O/G R/W
Y/R
Lg/R
R/L G/Y
R/G Y/R
9-167
P/B O/G Gy/R O
L/B G/B R/B B
B
Y/B L/W R/L B/W B/W
P0353