Yamaha XSR 900 2022 Service Manual page 524

Is check result OK?
YES
→ Go to step 5.
NO
a. Reinstall or replace the sensor.
b. Turn the main switch to "ON", and then check the DTC using the malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→ Go to step 7, and complete the service.
NO
→ Go to step 5.
5. Defective intake air temperature sensor.
• Execute the diagnostic mode. (Code 05)
• When engine is cold: Displayed temperature is close to the ambient temperature.
• The displayed temperature is not close to the ambient temperature → Check the intake air tempera-
ture sensor.
Refer to "DIAGNOSTIC CODE: SENSOR OPERATION TABLE" on page 9-77.
Is check result OK?
YES
→ Go to step 6.
NO
a. Replace the intake air temperature sensor.
Refer to "GENERAL CHASSIS (5)" on page 4-11.
b. Turn the main switch to "ON", and then check the DTC using the malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→ Go to step 7, and complete the service.
NO
→ Go to step 6.
6. Malfunction in ECU.
• Replace the ECU, and complete the service.
Refer to "REPLACING THE ECU (Engine Control Unit)" on page 8-41.
7. Delete the DTC and check that the MIL goes off.
• Confirm that the DTC has a condition of "Recovered" using the YDT, and then delete the DTC.
9-118
P0112, P0113