Yamaha XSR 900 2022 Service Manual page 598

Is it in the "Recovered" condition?
YES
→Go to step 10, and complete the service.
NO
→Go to step 5.
5. Defective cruise control setting switch.
• Replace the handlebar switch (left).
Refer to "HANDLEBAR" on page 4-60.
• Turn the main switch to "ON".
• Push the "RES+" side and "SET–" side of the cruise control setting switch, and then check the DTC
using the malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→Go to step 10, and complete the service.
NO
→Go to step 9.
6. Check the fuse. (main fuse, cruise control fuse)
Is check result OK?
YES
→Go to step 7.
NO
a. Replace the fuse.
b. Turn the main switch to "ON".
c. Push and release the "SET–" side of the cruise control setting switch, and then check the DTC
using the malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→Go to step 10, and complete the service.
NO
→Go to step 7.
7. Wire harness continuity.
• Open circuit check
• Disconnect the main fuse "4", ignition fuse "5", main switch coupler "6", cruise control fuse "1", han-
dlebar switch coupler (left) "2" and ECU coupler "3".
Between main fuse holder "4" and main switch
coupler "6"
Between main switch coupler "6" and ignition
fuse holder "5"
Between ignition fuse holder "5" and cruise con-
trol fuse holder "1"
Between cruise control fuse holder "1" and han-
dlebar switch coupler (left) "2"
Between handlebar switch coupler (left) "2" and
ECU coupler "3"
red–red
brown/blue–brown/blue
red–red/white
yellow/white–yellow/white
green/blue–green/blue
9-192
P0564