Yamaha XSR 900 2022 Service Manual page 511

Is check result OK?
YES
→ Go to step 3, and complete the service.
NO
a. Replace the intake air pressure sensor 1.
Refer to "THROTTLE BODIES" on page 7-6.
b. Start the engine and let it idle for approximately 5 seconds with the throttle fully closed, and then
check the DTC using the malfunction mode of the YDT.
c. Confirm the "Recovered" condition, then go to step 3.
3. Delete the DTC and check that the MIL goes off.
• Confirm that the DTC has a condition of "Recovered" using the YDT, and then delete the DTC.
9-105
P0106