Yamaha XSR 900 2022 Service Manual page 596

c. Confirm that it is defective.
d. Go to step 6.
TIP
Perform the procedure from step 6 to step 10.
3. Check the fuse.
• Check the ignition fuse and cruise control fuse.
Is check result OK?
YES
→Go to step 4.
NO
a. Replace the fuse.
b. Turn the main switch to "ON".
c. Push and release the "RES+" side of the cruise control setting switch, and then check the DTC
using the malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→Go to step 10, and complete the service.
NO
→Go to step 4.
4. Wire harness continuity
• Disconnect the ignition fuse "4", cruise control fuse "1", handlebar switch coupler (left) "2" and ECU
coupler "3".
• Open circuit check
Between ignition fuse holder "4" and cruise con-
trol fuse holder "1"
Between cruise control fuse holder "1" and han-
dlebar switch coupler (left) "2"
Between handlebar switch coupler (left) "2" and
ECU coupler "3"
4 1 2
Br/L G/L
Y/B
red/white–red
yellow/white–yellow/white
brown/blue–brown/blue
O/W Y/W G/B W/R
Y L/R W/L W/Y B W/G
9-190
3
L/B Y/L O/W Lg/L P/W P V L
L/W B/Y Br/L G/L Gy/G Br/W
L/Y L/W Lg/B G/W G/W
P0564
L Gy
B/L B/L
W/G W/Y