Yamaha XSR 900 2022 Service Manual page 14

To reset information display items
1. Rotate the wheel switch to select one of the
two vehicle information displays.
2. Press the wheel switch inward to highlight the
information display.
3. Rotate the wheel switch to select the desired
information display item.
4. Press and hold the wheel switch inward until
the highlighted display item is reset.
Transmission gear display
This shows which gear the transmission is in.
This model has 6 gears and a neutral position.
The neutral position is indicated by the neutral
indicator light " " and by the transmission gear
display " ".
MODE display
This display shows the currently selected "D-
MODE" and "TCS-MODE" settings. The mode
that is enlarged and displayed on the right can
be adjusted using the MODE up/down switches.
Use the "MODE" switch to toggle left-right be-
tween "TCS-MODE" and "D-MODE".
TIP
• When the malfunction indicator light "
auxiliary system warning "
temperature warning "
and "TCS-MODE" cannot be adjusted.
• The previously selected modes will be dis-
played when the vehicle power is turned on.
To turn off the traction control system, select
"TCS-MODE" with the "MODE" switch, then
press and hold the MODE up switch until "OFF"
is displayed. To turn the traction control system
back on, press the MODE down switch ("TCS-
MODE" will return to its previous setting).
", the
", or the coolant
" are on, "D-MODE"
TIP
• When "TCS-MODE" has been set to "OFF",
the traction control system, SCS and LIF sys-
tems are all turned off together.
• The "TCS-MODE OFF" and "TCS-MODE M"
settings can only be selected while the vehicle
is stopped.
Clock
The clock uses a 12-hour time system.
Quick shifter indicator "QS"
When able to shift, the respective QS
turns green.
When unable to shift, QS
If the quick shifter function is turned OFF, QS
itself is not displayed.
The quick shifter functions can be turned on or
off in the setting MENU.
TIP
The upshift and downshift functions are inde-
pendent and can be activated separately.
For more information on the quick shifter.
Setting menu icon "
Choose this icon and press the wheel switch in-
ward to change the settings MENU screen.
Grip warmer indicator (Option)
The grip warmers can be used when the engine
is running. There are 10 temperature levels.
When activated, the indicator will display the
temperature level from 1 (lowest) to 10 (highest).
To activate the grip warmer, use the wheel
switch to highlight the grip warmer display with
the cursor.
Press the wheel switch inward to select the grip
warmer function.
Once selected, rotate the wheel switch up and
down to adjust the temperature level.
Press the wheel switch inward to confirm the
temperature level and exit the grip warmer func-
tion.
ECA17932
NOTICE
• Be sure to wear gloves when using the grip
warmers.
• Do not use the grip warmers in warm
weather.
• If the handlebar grip or throttle grip be-
comes worn or damaged, stop using the
grip warmers and replace the grips.
1-5
FEATURES
or
is white.
"