Configuring Lag - TP-Link TL-SG116E User Manual

Switching
4

Configuring LAG

Choose the menu Switching > LAG to load the following page.
Figure 4-1 Configuring LAG
Follow these steps to configure LAG:
1) Select the desired LAG group from the drop-down list.
2) Click the ports to add to the LAG group. Click Apply.
3) In the table below, you can verify the LAG configuration result. You can select the LAG
and click Delete to delete ports from the LAG group.
Group ID
Ports
Displays the ID of the LAG group.
Displays the LAG member ports.
Configuring LAG
User Guide 28