III
4.4.1
Depiction as contour view
The simulation window displays a contour view. The contour view aids in the precise
positioning of the tool or with contour tracking in the machining plane.
The contour view uses the following colors (defaults):
Figure 68: Simulation window with contour view
1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool path (orange)
4.4.2
Activating the simulation window
258
Information for the Operator | Programming (software option)
Tap Graphic
The simulation window for the highlighted block appears.
To leave the simulation window, tap Position in the view bar
The parameter view is shown.
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
1
2
3