Working With The Positioning Aid; Applying The Scaling Factor - HEIDENHAIN ND 7000 Operating Instructions Manual

III
2.5

Working with the positioning aid

During positioning to the next nominal position, the product assists you by
displaying a graphic positioning aid ("traversing to zero"). A scale is shown
underneath each axis you traverse to zero. The graphic positioning aid is a small
square that symbolizes the target position of the tool.
Figure 59: Distance to go with position view with
graphical positioning aid
1 Actual value
2 Distance-to-go
3 Positioning aid
The positioning aid moves across the measuring scale when the tool center is
located within a range of ± 5 mm of the nominal position. The color also changes in
the following way:
Display of positioning aid
Red
Green
2.6

Applying the Scaling factor

If a scaling factor is activated for one or more axes, this scaling factor is multiplied
by the stored nominal position during execution of a block. This enables you to
mirror and scale a block.
You can activate a scaling factor in the quick access menu.
Further information: "Adjusting settings in the quick access menu", Page 42
238
1
2
3
Meaning
The tool center is moving away from the
nominal positions
The tool center is moving toward the nominal
position
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
Information for the Operator | MDI mode