Block Types; Positioning - HEIDENHAIN ND 7000 Operating Instructions Manual

III
Activation
1 View bar
2 Toolbar
3 Program management
4.2

Block types

You can use the following block types for programming:
Positioning functions
Change of coordinate system (preset)
Machine functions
Machining pattern
4.2.1

Positioning

You can manually define position values for positioning. Depending on the
configuration of the connected machine tool, you can then move the tool to these
positions either automatically or manually.
The following parameters are available:
250
Tap Programming in the main menu
The operating element belongs to a group.
Further information: "Selecting grouped operating
elements", Page 29
The user interface for programming is displayed.
1
The status bar and the optional OEM bar are not available in the
Programming menu.
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
Information for the Operator | Programming (software option)
3
2