Overview - HEIDENHAIN ND 7000 Operating Instructions Manual

Information for the Operator | Programming (software option)
4.1

Overview

This chapter describes the Programming operating mode and how to create new
programs and edit existing programs in this mode.
Make sure that you have read and understood the "Basic Operation"
chapter before carrying out the actions described below.
Further information: "Basic Operation", Page 18
Short description
The product uses programs for recurring tasks. Programs are created by defining
various blocks, such as positioning functions or machine functions. A sequence
of multiple blocks then forms a program. You can save a maximum of 100 blocks
within a program.
Programming does not require connecting the product to a machine tool.
To obtain a better overview during programming, you can use the
ND 7000 Demo software for programming. You can export the generated
programs and load them onto the device.
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
III
249