Information for the Operator | MDI mode
2.4.1
Depiction as contour view
The simulation window displays a contour view. The contour view aids in the precise
positioning of the tool or with contour tracking in the machining plane.
The contour view uses the following colors (defaults):
Figure 58: Simulation window with contour view
1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool path (orange)
Activating the simulation window
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
Tap Graphic
The simulation window for the currently selected block
appears.
1
2
3
III
237