Managing Programs; Opening A Program; Closing A Program - HEIDENHAIN ND 7000 Operating Instructions Manual

Information for the Operator | Program run (software option)
3.3

Managing programs

To run a program, open the program file, which must be of the *.i type.
The default storage location for programs is Internal/Programs.
3.3.1

Opening a program

3.3.2

Closing a program

HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
Tap Open program in the program management
Select the storage location in the dialog, e. g.
Internal/Programs or USB mass storage device
Tap the folder containing the file
Tap the file
Tap Open
The selected program is loaded.
Tap Close program in the program management
The opened program is closed.
III
247