Overview - HEIDENHAIN ND 7000 Operating Instructions Manual

Information for the Operator | Program run (software option)
3.1

Overview

This chapter describes the Program Run operating mode and how to execute a
previously created program in this mode.
Make sure that you have read and understood the "Basic Operation"
chapter before carrying out the actions described below.
Further information: "Basic Operation", Page 18
Short description
In the Program Run operating mode, you use an already created program for part
production. It is not possible to change the program in this operating mode, but you
can check it in Single Block mode when running the program.
Further information: "In Single block mode", Page 243
During execution of a program, the wizard guides you through the individual program
steps. The optional simulation window can serve as a graphical positioning aid for
the axes you need to move.
Call
1 View bar
2 Status bar
3 Program control
4 Spindle speed (machine tool)
5 Program management
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
Tap Program run in the main menu
The operating element belongs to a group.
Further information: "Selecting grouped operating
elements", Page 29
The user interface for Program Run is displayed.
1
4
5
2
3
III
241