Tap Open Table; The Tool Table Dialog Box Appears; Tap Close; The Tool Table Dialog Is Closed - HEIDENHAIN ND 7000 Operating Instructions Manual

Information for OEM and Setup Users | Setup
Deleting a tool
Creating a preset table
You can access the preset table on the status bar. The preset table contains the
absolute positions of the presets with respect to the reference mark. You can save a
maximum of 99 presets in the preset table.
1
4
Figure 41: Preset table with absolute positions
1 Bezeichnung
2 Koordinaten
3 Ausrichtung
4 Bezugspunkttabelle bearbeiten
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023

Tap Open table

The Tool table dialog box appears.

To select one or more tools, tap the checkbox in the relevant
row
The active checkbox is highlighted in green.
The entry for a tool can be locked to prevent
accidental changes or deletion.
Tap the Unlock symbol next to the entry
The symbol changes and the entry is unlocked.
Tap Delete
A message appears.
Close the message with OK
The selected tool is deleted from the tool table.

Tap Close

The Tool table dialog is closed.

2 3
II
157