Requirements - HEIDENHAIN ND 7000 Operating Instructions Manual

III
5.3

Requirements

For production of the aluminum flange, you will work on a manually operated
rapid radial drilling machine or radial drilling machine. The following dimensioned
technical drawing is available for the flange:
Figure 70: Example workpiece – technical drawing
Machine
The machine is on
A pre-processed workpiece blank is clamped on the machine
Product
A spindle axis is configured (only for the product with ID 1089179-xx)
The calibration processes has been performed
The axes have been homed
Further information: "Conducting the reference mark search", Page 221
A HEIDENHAIN KT 130 edge finder is available
Tools
The following tools are available:
Drill Ø 5.0 mm
Drill Ø 6.1 mm
Drill Ø 19.8 mm
Reamer Ø 20 mm H6
Countersink Ø 25 mm 90°
M6 tap
264
100
90±0.1
Ø50±0.1
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
Information for the Operator | Application example
20
A-A
13
10
1x45°