Opening The Program; Running A Program - HEIDENHAIN ND 7000 Operating Instructions Manual

III
5.9.1

Opening the program

5.9.2

Running a program

274
Tap Program run in the main menu
The operating element belongs to a group.
Further information: "Selecting grouped operating
elements", Page 29
The user interface for Program Run is displayed.
Tap Open program in the program management
A dialog box opens.
Select the Internal/Programs storage location in the dialog
Tap the file Example.i
Tap Open
The selected program is opened.
On the radial drilling machine, insert drill Ø 5.0 mm into the
spindle
Tap NC START on the program control
The product marks the first block Tool call of the program.
The wizard displays the relevant instructions.
Tap NC START again to begin machining
The spindle speed is set, and the first machining block is
highlighted.
The single steps of the Row of holes machining block are
displayed.
Move the axes to the first position
Drill all the way through with the Z axis
Call the next step in the Row of holes machining block with
Next
The next step is called.
Move the axes to the next position
Follow the instructions in the wizard
After you have drilled the row of holes, tap Close
Machining is ended.
The program is reset.
The wizard is closed.
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
Information for the Operator | Application example