Figure 10: Rear Panel On Devices With Id 1089181-01 - HEIDENHAIN GAGE-CHEK 2000 Series Operating Instructions Manual

5
Rear panel without dust protection caps
10

Figure 10: Rear panel on devices with ID 1089181-01

Connections:
5 D-sub connections for encoders, one input enabled by default, another two inputs can
be enabled optionally
X1 to
11 μA
X21 to
TTL interface
X1, X2, X21: Device variant with two 15-pin D-sub connections for encoders with the
1 V
PP
with a TTL interface
7 X32: USB 2.0 Hi-speed connection (type A) for printers, input devices or USB mass
storage
10 Speaker
Functional ground connection as per IEC/EN 60204-1
8
6 X116: RJ45 Ethernet connection for communication and data exchange with subse-
quent systems or PC
4 X113: 15-pin D sub connection for touch probes (e.g., HEIDENHAIN touch probe)
9 X100: Power switch and power connection
44
HEIDENHAIN
X100
AC 100 V ... 240 V
50 Hz ... 60 Hz
(max. 38 W)
9
X3: device variant with 15-pin D-sub connections for encoders with 1 V
or EnDat 2.2 interface
PP
X23: Device variant with 9-pin D-sub connections for encoders with a
, 11μ A , or EnDat 2.2 interfaces, and a 9-pin D-sub connection for encoders
PP
Installation | Device overview
4
5
X113
X3
6
X2
7
X1
X32
X116
8
,
PP
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020