For Print Server Mode With Netware 4.X Bindery Emulation - Epson AcuLaser CX37DN Series Reference Manual

7. In Administrator mode of Web-Based EpsonNet Config, select NetWare from the Network tab,
and then specify the following settings.
❏ NetWare Print: Select Enable.
❏ Frame Type:
Select Auto. (Select the frame type according to the network environment.)
❏ Mode: Select NPrinter/RPrinter.
❏ Printer Name:
Specify the printer name. (Default: AL-CX37-xxxxxx)
❏ Printer Number:
Specify the printer number (0-255). When 255 is specified, the setting is Auto.
8. Restart the printer.
9. Use the NetWare server console to display the print server screen, and then check that the created
printer is shown as Waiting for Job for the connected printer (0).

For Print Server Mode With NetWare 4.x Bindery Emulation

Note:
Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
1. From a client computer, log on with Supervisor permissions to access the NetWare server where
the Pserver is registered.
2. Start up Pconsole.
3. From the Available Options list, select Quick Setup, and then click the Enter button.
4. Enter the appropriate names in the Printer Server Name, Printer Name, Print Queue Name, and
Print Queue Volume fields, select Other/ Unknown from the Printer type field, and then save the
specified settings.
5. Click the Esc button to quit Pconsole.
6. In Administrator mode of Web-Based EpsonNet Config, select NetWare. from the Network tab,
and then specify the following settings.
Epson AcuLaser CX37 Series
Operation on NetWare
Reference Guide
37