Group Dial Setting - Epson AcuLaser CX37DN Series Reference Manual

Item
Account
Information
Apply button
Clear button

Group Dial Setting

On the Scan - Group Dial Setting page, settings for group dialing can be specified.
Item
No.
Name
Address
Delete button
Anonymous/Private Site
User Name
Password
Confirm
Description
Displays the number in the group dial list. Click a group dial number where no
destination is registered to add in the Group Dial Registration page.
For details, refer to "Group Dial Registration (Destination type)" on page 147.
If a group is already registered with the number that is clicked, the registered
information can be edited.
Displays the name of the group dial.
Shows whether the registered group contains fax destinations or e-mail
destinations.
Deletes the corresponding group dial.
Epson AcuLaser CX37 Series
Description
Select the type of account used for logging into the SMB server.
If Anonymous is selected, log in with Anonymous as the account
name and guest as the password.
If Private Site is selected, be sure to specify settings for User Name,
Password and Confirm.
Choices: Anonymous, Private Site
Default: Anonymous
Specify the user name to log in to SMB server when Private Site is
selected.
Range: Up to 20 characters
Specify the password to log in to SMB server when Private Site is
selected.
Range: Up to 20 characters
Type in the password again for confirmation.
Range: Up to 20 characters
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Using Web-Based EpsonNet Config
Reference Guide
146