Ssl/Tls Information - Epson AcuLaser CX37DN Series Reference Manual

SSL/TLS

SSL/TLS Information

Note:
As a default, SSL/TLS is not installed. Click Setting to create a certificate and specify the SSL settings.
Item
Setting button
SSL/TLS Setting (When a certificate is not installed)
Item
Create a Self-signed Certificate
Request a Certificate
Install a Certificate
Next button
Cancel button
SSL/TLS Setting (When a certificate is installed)
Item
Set a Encryption Strength
Remove a Certificate
Mode Using SSL/TLS
Next button
Cancel button
Description
Displays the SSL/TLS Setting page.
Description
Creates a self-signed certificate.
Creates data for requesting that a certificate be issued from a certificate authority.
Installs the certificate issued by the certificate authority.
Click to display the selected page.
Click to cancel the entered data and return to the Network - SSL/TLS - SSL/TLS
Information page.
Description
Specifies the encryption level. In addition, SSL/TLS can be disabled.
Removes the certificate.
Specifies the SSL transmission mode.
Click to display the selected page.
Click to cancel the entered data and return to the Network - SSL/TLS - SSL/TLS
Information page.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
183