Epson AcuLaser CX37DN Series Reference Manual page 144

Item
Account
Information
Apply button
Clear button
For SMB server
Note:
The Network - SMB screen, set to Enable from Send when sending to SMB server. For details, refer to
"SMB" on page 182.
Item
File Destination
Anonymous/Private Site
User Name
Password
Confirm
Destination Name
Destination Address
Directory
Epson AcuLaser CX37 Series
Description
Select the type of account used for logging into the FTP server.
If Anonymous is selected, log in with Anonymous as the account
name and guest as the password.
If Private Site is selected, be sure to specify settings for User Name,
Password and Confirm.
Choices: Anonymous, Private Site
Default: Anonymous
Specify the user name to log in to FTP server when Private Site is
selected.
Range: Up to 20 characters
Specify the password to log in to FTP server when Private Site is
selected.
Range: Up to 20 characters
Type in the password again for confirmation.
Range: Up to 20 characters
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
Specify the name of the destination.
Range: Up to 20 characters
Specify the destination IP address of SMB server or NetBIOS.
Range: Up to 64 characters
Specify the destination directory on the SMB server.
Range: Up to 128 characters
Using Web-Based EpsonNet Config
Reference Guide
144