Administrator Mode; Viewing Printer Status; System Page - Epson AcuLaser CX37DN Series Reference Manual

Administrator Mode

In order to change any configuration settings through Web-Based EpsonNet Config, you must first
enter Administrator Mode.
1. Select Administrator.
2. Click the Log in button.
3. Type the password in the Admin Password text box.
Note:
Default password is set to "administrator"; however, once you have logged on in Administrator
Mode, the password can be specified in the System - Admin Password window.
4. Click OK button.

Viewing Printer Status

System Page

On this page you find printer status and current configuration settings, printer identification, and
links to all other web pages.
Note:
All of the information displayed on the System page is read only.
Device Information
Summary
Item
Copier RAM
Printer RAM
HDD
Memory Card
Description
Displays the amount of copier memory installed in the printer.
Displays the amount of printer memory installed in the printer.
If an optional hard disk drive is installed in the printer, displays the size of the hard
disk.
This item is not supported by this printer.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
85