Epson AcuLaser CX37DN Series Reference Manual page 145

Item
Basic Setting Color Setting
Resolution
Mode
Attachment file format
Coding method
Scan area
E-mail Enable Notification
Notification
Notification Address
Epson AcuLaser CX37 Series
Description
Select the color tone to be used.
Choices: BW Only, Color or Gray
Default: Color or Gray
Select the resolution of the scanner.
Choices: 150 x 150, 300 x 300
Default: 300 x 300
Select the mode type for the scanner.
Choices: Text, Photo, MIX
Default: MIX
Select the desired file format.
Choices: TIFF, PDF, JPEG
Default: PDF
Note:
If Color Setting is set to BW Only, JPEG cannot be selected.
Select the coding method.
Choices: MH, MR, MMR
Default: MH
If Color Setting is set to Color or Gray, no setting can be selected.
Select the scanning area.
Choices: A5, B5, A4, ST, LT, LG
Default: A4 (metric), LT (inch)
Select whether or not e-mail notifications are to be sent after a
transmission to an SMB server is completed.
Choices: On, Off
Default: Off
Note:
E-mail notification is not available when Disable is selected of SMTP
in Network - Email - Send Email screen.
Register the destination e-mail address of notification. Up to 10
addresses can be registered.
Range: Up to 64 characters
Using Web-Based EpsonNet Config
Reference Guide
145