Ipv4 Settings - Epson AcuLaser CX37DN Series Reference Manual

Item
SLP
LLMNR
Apply button
Clear button

IPv4 Settings

For more information on these TCP/IP, see Chapter 5 "Network Printing" on page 61.
Item
Auto IP
IP Address*
Description
Select whether or not SLP is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SLP
Select whether or not LLMNR is used.
Choices: Enable, Disable
Default: Enable
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
Specifies the automatic assigning method for the printer IP address.
Choices: DHCP, BootP, ARP/PING
Note:
You can select multiple items from the available choices.
Default: DHCP
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - DHCP, BOOTP, ARP/PING
Sets the printer's IP address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
Note:
If the specified IP address is outside of the allowable range, the value is not changed, even
after the Apply button is clicked. The setting returns to the previous value.
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IP ADDR. SETTING
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
156