Epson AcuLaser CX37DN Series Reference Manual page 187

Item
Create button
Back button
Cancel button
Remove a Certificate
Note:
This menu item appears if a certificate is installed.
Item
OK button
Back button
Cancel button
Mode Using SSL/TLS
Note:
This menu item appears if a certificate is installed.
Item
Mode Using SSL/TLS
Apply button
Clear button
Back button
Cancel button
Description
Click to specify the encryption level.
If the Network - SSL/TLS - Install a Certificate page was previously displayed, the
certificate is installed.
Returns to the previous screen.
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
Description
Click to display a confirmation message. Click OK in the confirmation message to
delete the certificate.
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
Description
Selects the SSL transmission mode.
Choice: Disable, Enable
Default: Disable
Click to apply the setting specified beside "Mode Using SSL/TLS".
Resets all configuration settings to previous values.
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
187