Item
Authentication
Algorithm for ESP
Authentication
Algorithm for AH
Apply button
Clear button
Cancel button
IPsec (IPsec Peer Settings)
Item
No.
Perfect Forward Secrecy
Peer's Address
Pre-Shared Key
Encapsulation Mode
Apply button
Clear button
Cancel button
Description
When ESP is selected for Security Protocol, specify the ESP authentication algorithm.
Choices: None, MD5, SHA-1
Default: None
When AH is selected for Security Protocol, specify the AH authentication algorithm.
Choices: MD5, SHA-1
Default: MD5
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
Description
Displays the number (No.) to be registered.
To increase the IKE strength, select Use.
Choices: Not Use, Use
Default: Not Use
Specify the IP address of the peer.
Range: 2 to 39 bytes
Note:
An IPv4 or IPv6 address can be specified.
Specify the Pre-Shared Key text shared with the peer.
Range: Up to 64 bytes
Specify the operation mode of IPsec.
Choices: Not Use, Tunnel Mode, Transport Mode
Default: Not Use
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
164