Epson AcuLaser CX37DN Series Reference Manual page 160

DNS Settings
For more information on these TCP/IP, see Chapter 5 "Network Printing" on page 61.
Item
Host Name
Domain Name
DNS Server(IPv4)
DNS Server(IPv6)
Search Domain Name
Dynamic DNS
Apply button
Clear button
IP Address Filtering
Note:
❏ The settings described below are not applied to the DNS server and DHCP server.
❏ If the range of permitted IP addresses in Access Permission Address overlaps the range of refused IP
address in Access Refuse Address, the refuse setting of Access Refuse Address is given priority.
Description
Specifies the host name.
Range: Up to 63 bytes
Default: EPSON AL-CX37-xxxxxx
Note:
xxxxxx displays six last digits of the MAC address in hexadecimals.
Specifies the domain name.
Range: Up to 63 bytes
Specifies the IPv4 DNS server address.
Up to three can be registered.
Default: 0.0.0.0
Specifies the IPv6 DNS server.
Up to three can be registered.
Default: ::
Specifies the DNS search domain name.
Up to three can be registered.
Select whether or not Dynamic DNS is used.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - DYNAMIC DNS
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
160