Epson AcuLaser CX37DN Series Reference Manual page 181

Item
Password
Port Number
POP3 Timeout
SMTP
Authentication
User Name
Password
Realm
Apply button
Clear button
Note:
Use alphanumeric characters (including some symbols) for the Sender Name and Default Subject. Using
other characters will corrupt the characters for the E-mail destination. For details on characters that can
be entered, refer to the Printer/Copier/Scanner User's Guide.
Description
Type in the password used for POP3 server.
Range: Up to 15 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3
PASSWORD
Specify the port number used for communicating with the SMTP server.
Range: 1 to 65535
Default: 110
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3
PORT NO.
Select the amount of time (in seconds) until the connection with the POP3 server
times out.
Range: 30 to 300
Default: 30
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3
TIMEOUT
If Enable is selected, SMTP server authentication is enabled.
Choices: Enable, Disable
Default: Disable
Type in the user name used for authentication with SMTP Authentication.
Range: Up to 63 characters
Type in the password used for authentication with SMTP authentication.
Range: Up to 128 characters
Specify the realm used with Digest-MD5 authentication.
Range: Up to 255 characters
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
181