Epson AcuLaser CX37DN Series Reference Manual page 122

Item
Copies
Paper Size
Width
Length
Paper Type
Collate
Apply button
Clear button
Description
Specifies the default setting for number of copies to be printed.
Range: 1-9999
Default: 1
Configuration Menu Equivalent:
PS/PCL PRINT - PAPER MENU - COPIES
Specifies the default setting for the size of paper.
Configuration Menu Equivalent:
PS/PCL PRINT - SYS DEFAULT MENU - PAPER - DEFAULT PAPER - PAPER SIZE
Specifies the paper width when Paper Size is set to Custom Size.
Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)
Configuration Menu Equivalent:
PS/PCL PRINT - SYS DEFAULT MENU - PAPER - DEFAULT PAPER - CUSTOM SIZE -
WIDTH
Specifies the paper length when Paper Size is set to Custom Size.
Range: 5.83 - 14.00 (inch) / 148 - 356 (mm)
Configuration Menu Equivalent:
PS/PCL PRINT - SYS DEFAULT MENU - PAPER - DEFAULT PAPER - CUSTOM SIZE -
LENGTH
Specifies the default setting for the type of paper.
Choices: Plain Paper, Recycled, Thick 1, Thick 2, Label, Envelope, Postcard,
Letterhead, Glossy 1, Glossy 2, Single Side Only, Special Paper
Default: Plain Paper
Configuration Menu Equivalent:
PS/PCL PRINT - SYS DEFAULT MENU - PAPER - DEFAULT PAPER - PAPER TYPE
If On is selected, all pages in a copy of the document can be printed before
printing the next copy.
If Off is selected, all copies of the document are not printed separately.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PS/PCL PRINT - PAPER MENU - COLLATE
Note:
This menu item appears only if an optional hard disk drive is installed.
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
122