Print Page - Epson AcuLaser CX37DN Series Reference Manual

Print Page

This page allows you to check the settings for printing when there is no PDL printer driver.
Default Settings
General Settings
Item
PDL
Paper Source
Duplex
Output Tray
Copies
Paper Size
Width
Length
Paper Type
Collate
Description
Indicates default language to be selected.
The paper tray that is normally used is indicated.
If Long-Edge Binding is indicated, the pages will be printed on both sides of the
paper for long-edge binding.
If Short-Edge Binding is indicated, the pages will be printed on both sides of the
paper for short-edge binding.
Displays the name of the output tray.
Indicates the default setting for number of copies to be printed.
Indicates the default setting for the size of paper.
Indicates the paper width when Paper Size is set to Custom Size.
Indicates the paper length when Paper Size is set to Custom Size.
Indicates the default setting for the type of paper.
If On is indicated, all pages in a copy of the document can be printed before
printing the next copy.
If Off is indicated, all copies of the document are not printed separately.
Note:
This menu item appears only if an optional hard disk drive is installed.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
93