SMB
Send SMB
Item
Send
NTLM Setting
User Authentication
DFS
Apply button
Clear button
Direct Hosting Settings
Item
Direct Hosting Settings
Apply button
Clear button
Description
If Enable is selected, SMB transmission is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SMB
Select the version of NTLM Setting.
Choices: v1, v2, v1/v2
Default: v1
Select whether or not NTLM user authentication is performed.
Choices: On, Off
Default: On
To perform SMB transmission in a distributed file system (DFS) environment,
select Enable.
Choices: Enable, Disable
Default: Enable
Applies the configuration settings in this window.
Resets all configuration settings to previous values.
Description
Select whether or not Direct Hosting of SMB is used. To use IPv6 addresses for
communication, select Enable.
Choices: Enable, Disable
Default: Enable
Applies the configuration settings in this window.
Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
182