Epson AcuLaser CX37DN Series Reference Manual page 128

Item
Apply button
Clear button
PS Settings
Item
Wait Timeout
PS Protocol
Print to PS Error
Auto Trapping
Description
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
Sets Postscript timeout. "0" means that no time-out control is effective.
Range: 0 - 300 (in seconds)
Default: 0
Configuration Menu Equivalent:
PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - POSTSCRIPT - WAIT TIMEOUT
Specifies the PS protocol.
Choices: Auto, Normal, Binary
Default: Auto
Configuration Menu Equivalent:
PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - POSTSCRIPT - PS PROTOCOL
Specifies whether or not error printing is performed.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - POSTSCRIPT - PS ERROR
PAGE
Select whether or not neighboring colors are printed superimposed in order to
prevent white space around images.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - POSTSCRIPT - AUTO
TRAPPING
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
128